Balance Community Materials test laboratory · SnapLab

Record Sample 5
Product Paradigm Signature
Batch W25HZ-BLACK

Tensile test

Sample 5

Paradigm SignatureBatch W25HZ-BLACKAugust 19, 2026

Breaking force

21.18kN

Force–time trace

The capture from the rig’s force channel, plotted against elapsed time.

Test details

Tested
Aug 19, 2026 · 14:37
Duration
75.7s
Scan rate
500.0Hz
Sample
5
Study
Batch Report - Paradigm Signature (Black) - W25HZ
Test machine
SnapLab break-test bench
DAQ device
LabJack T7
Beam location
No. 2 — Second position
Fixed grip
AWL6
Moving grip
AWL6

Instrumentation

Recorded channels
Channel Sensor Type Units Calibrated
AIN2 Main Main Force Sensor force kN Not recorded

Method

Paradigm Signature (Black) in the Alpine WebLock 6 to Alpine WebLock 6 break-test rig, line drawing

Drag to rotate · scroll or pinch to zoom · right-drag or two-finger drag to pan

Test setup: Alpine WebLock 6 to Alpine WebLock 6

Configuration Alpine WebLock 6 to Alpine WebLock 6

Determines strength retention in the 6-series Alpine Weblock.

Each AWL6 is anchored to the test bed with a Van Beast Shackle (usually 1/2" or 5/8", depending on the webbing strength). The webbing sample is installed in each weblock in the same orientation on both ends with a minimal tail (75 - 150 mm (3 - 6 inches)). The sample is then pulled to failure.

  • Sample Length - 1.5 m (5 ft)

  • Pull Rate - ~350 mm per minute

Part of batch W25HZ-BLACK →