Balance Community Materials test laboratory · SnapLab

Record Sample 5
Product Jelly PRO
Batch W25EZ-DESERT

Tensile test

Sample 5

Jelly PROBatch W25EZ-DESERTApril 5, 2026

Breaking force

23.57kN

Force–time trace

The capture from the rig’s force channel, plotted against elapsed time.

Test details

Tested
Apr 5, 2026 · 11:17
Duration
36.11s
Scan rate
500.0Hz
Sample
5
Study
Batch Report - Jelly PRO Desert - W25EZ
Test machine
SnapLab break-test bench
DAQ device
LabJack T7
Fixed grip
Sewn Loop
Moving grip
Sewn Loop

Instrumentation

Recorded channels
Channel Sensor Type Units Calibrated
AIN1 Main Main Force Sensor force kN Mar 1, 2026

Method

Jelly PRO (Desert) sewn loop (pattern 512) in the Sewn Loop to Sewn Loop break-test rig, line drawing

Drag to rotate · scroll or pinch to zoom · right-drag or two-finger drag to pan

Test setup: Sewn Loop to Sewn Loop · Bartack ramp for 25 mm webbings

Configuration Sewn Loop to Sewn Loop

Sewing pattern Bartack ramp for 25 mm webbings Pattern 512

Determines strength retention in a sewn loop. The particular pattern used for sewing is indicated on each test.

Each sewn loop is done in an opposite direction in order to take out the possibility of failure by uneven loading across the width and thickness of the webbing. Each sewn loop is directly attached to the clevis pins on our test machine, with a diameter of pin diameter of 19mm.

These tests are often used as our elongation tests as well, since they experience the least change in length within the anchoring method.

  • Webbing starting length - 1.5 m (5 ft)

  • Pull Rate - ~350 mm per minute

Part of batch W25EZ-DESERT →