Balance Community Materials test laboratory · SnapLab

Record Sample 3
Product Jelly PRO
Batch W25EZ-CLASSIC

Tensile test

Sample 3

Jelly PROBatch W25EZ-CLASSICApril 5, 2026

Breaking force

26.47kN

Force–time trace

The capture from the rig’s force channel, plotted against elapsed time.

Test details

Tested: Apr 5, 2026 · 11:17
Duration: 59.5s
Scan rate: 500.0Hz
Sample: 3
Study: Batch Report - Jelly PRO Classic - W25EZ
Test machine: SnapLab break-test bench
DAQ device: LabJack T7
Fixed grip: AWL6
Moving grip: AWL6

Instrumentation

Recorded channels
Channel	Sensor	Type	Units	Calibrated
AIN1 Main	Main Force Sensor	force	kN	Mar 1, 2026

Method

Jelly PRO (Classic) in the Alpine WebLock 6 to Alpine WebLock 6 break-test rig, line drawing — Test setup: Alpine WebLock 6 to Alpine WebLock 6

Configuration Alpine WebLock 6 to Alpine WebLock 6

Determines strength retention in the 6-series Alpine Weblock.

Each AWL6 is anchored to the test bed with a Van Beast Shackle (usually 1/2" or 5/8", depending on the webbing strength). The webbing sample is installed in each weblock in the same orientation on both ends with a minimal tail (75 - 150 mm (3 - 6 inches)). The sample is then pulled to failure.

Sample Length - 1.5 m (5 ft)
Pull Rate - ~350 mm per minute

Part of batch W25EZ-CLASSIC →