Balance Community Materials test laboratory · SnapLab

Record Sample 2
Product Jelly PRO
Batch W25EZ-CLASSIC

Tensile test

Sample 2

Jelly PROBatch W25EZ-CLASSICApril 5, 2026

Breaking force

21.24kN

Force–time trace

The capture from the rig’s force channel, plotted against elapsed time.

Test details

Tested
Apr 5, 2026 · 11:17
Duration
63.5s
Scan rate
500.0Hz
Sample
2
Study
Batch Report - Jelly PRO Classic - W25EZ
Test machine
SnapLab break-test bench
DAQ device
LabJack T7
Fixed grip
MightyLock
Moving grip
MightyLock

Instrumentation

Recorded channels
Channel Sensor Type Units Calibrated
AIN1 Main Main Force Sensor force kN Mar 1, 2026

Method

Jelly PRO (Classic) in the MightyLock to MightyLock break-test rig, line drawing

Drag to rotate · scroll or pinch to zoom · right-drag or two-finger drag to pan

Test setup: MightyLock to MightyLock

Configuration MightyLock to MightyLock

Determines strength retention in the MightyLock line-locker ring.

We have a Mightylock installation at both ends of the webbing. The webbing is wrapped around the MightyLock in the Right-Side-Up configuration and anchored to either a 5/8" Van Beast Shackle (if it's a 25mm/1-inch webbing) or a 1/2" Van Beast Shackle (if it's a 19-20mm webbing). The tails are kept to a minimum on both ends (75 - 150mm (3 - 6 inches)).

  • Sample Length - 1.5 m (5 ft)

  • Pull Rate - ~350 mm per minute

Part of batch W25EZ-CLASSIC →