Balance Community Materials test laboratory · SnapLab

Record Sample 2
Product Mantra MK4
Batch W25AI

Tensile test

Sample 2

Mantra MK4Batch W25AIJuly 29, 2026

Breaking force

38.6kN

Force–time trace

The capture from the rig’s force channel, plotted against elapsed time.

Test details

Tested
Jul 29, 2026 · 15:44
Duration
48.8s
Scan rate
500.0Hz
Sample
2
Study
Batch Report - Mantra MK4 - W25AI
Test machine
SnapLab break-test bench
DAQ device
LabJack T7
Beam location
No. 2 — Second position
Fixed grip
AWL6
Moving grip
AWL6

Instrumentation

Recorded channels
Channel Sensor Type Units Calibrated
AIN2 Main Main Force Sensor force kN Not recorded

Method

Mantra MK4 in the Alpine WebLock 6 to Alpine WebLock 6 break-test rig, line drawing

Drag to rotate · scroll or pinch to zoom · right-drag or two-finger drag to pan

Test setup: Alpine WebLock 6 to Alpine WebLock 6

Configuration Alpine WebLock 6 to Alpine WebLock 6

Determines strength retention in the 6-series Alpine Weblock.

Each AWL6 is anchored to the test bed with a Van Beast Shackle (usually 1/2" or 5/8", depending on the webbing strength). The webbing sample is installed in each weblock in the same orientation on both ends with a minimal tail (75 - 150 mm (3 - 6 inches)). The sample is then pulled to failure.

  • Sample Length - 1.5 m (5 ft)

  • Pull Rate - ~350 mm per minute

Part of batch W25AI →