Balance Community Materials test laboratory · SnapLab
Record Sample 3
Product Green
Batch W24SZ
Breaking force
29.94kN
Force–time trace
Test details
- Tested
- Aug 18, 2026 · 14:46
- Duration
- 80.1s
- Scan rate
- 500.0Hz
- Sample
- 3
- Study
- Batch Report - Green - W24SZ
- Test machine
- SnapLab break-test bench
- DAQ device
- LabJack T7
- Beam location
- No. 2 — Second position
- Fixed grip
- MightyLock
- Moving grip
- MightyLock
Instrumentation
| Channel | Sensor | Type | Units | Calibrated |
|---|---|---|---|---|
| AIN2 Main | Main Force Sensor | force | kN | Not recorded |
Method
Configuration MightyLock to MightyLock
Determines strength retention in the MightyLock line-locker ring.
We have a Mightylock installation at both ends of the webbing. The webbing is wrapped around the MightyLock in the Right-Side-Up configuration and anchored to either a 5/8" Van Beast Shackle (if it's a 25mm/1-inch webbing) or a 1/2" Van Beast Shackle (if it's a 19-20mm webbing). The tails are kept to a minimum on both ends (75 - 150mm (3 - 6 inches)).
Sample Length - 1.5 m (5 ft)
Pull Rate - ~350 mm per minute