Secondaire

$84.00
LengthSewn Loop - End 1Sewn Loop - End 2: 50m / Sleeved / Sleeved (165')

Lightweight Polyester webbing for backups

An affordable and lightweight polyester webbing that's great for backups or low stretch longlines

Quick Specs:

Stretch9.78% @ 6 kN
MaterialPolyester
Weight44 g/m (2.96 lbs/100 feet)
MBS25.0 kN (5,620 lbf)
WLL8.3 kN (1,873 lbf)
Width20.0 mm (0.79 inches)

Style

Playful
Stable

Best Tension

1.0 - 5.0kN

0kN
2kN
4kN
6kN
8kN
10kN

Introducing our all new Secondaire - a lightweight polyester highline webbing that's 20mm wide, 25 kN strong, and is built for backups on highlines. With an incredible strength to weight ratio and robust weave, this webbing is ideal for backing up any length highline.

Secondaire uses a plain weave with low pick count to achieve very close to ideal efficiency in the weaving process to get a fantastic strength to weight ratio that is only matched by using higher strength materials such as High Tech. This makes Secondaire especially good as a backup line.

Made in the US.


Simple Design for Backup Lines

No need to get fancy for a webbing used as a backup

The aim with Secondaire was to get as simple of a polyester webbing that we could in order to make backup lines more accessable. We achieved that by sticking with a plain weave structure, using natural polyester yarn and a simple marker yarn to help detect twists. No fancy weave technology or specialty yarn was used in Secondaire in order to keep costs as low as possible.

Secondaire weave design.

Due to the simple structure of Secondaire, it packs very small and handles very well in the hand. We estimate about a 9.5L volume per 100 meters of Secondaire, which is quite small for polyester webbings. Keep the pack small and light for those alpine missions without breaking the bank with Secondaire.

Higher Stretch for Soft landings

A big stretch curve for soft backup falls, if ever needed.

Up until about 4 kN, Secondaire stretches just about the same as our Jelly PRO webbing, which is already a high stretch polyester. However, beyond 4 kN, Secondaire stretches MUCH more than any of our other polyester webbings. Up and beyond 7 kN, it starts to stretch more than some of our nylon webbings, which is crazy! Between 4-6 kN, it has a drastic increase in stretch, which is where we estimate forces will be if you were to ever take a backup fall. This is great news as it means the backup fall on Secondaire has a great deal of force limiting behavior to keep forces on your body and anchors down during a dynamic event.

Secondaire Stretch Curve

Compare the stretch of Secondaire to our other webbings on our Webbing Stretch page

Simple Colors Scheme

With only white and black as the colors, Secondaire keeps it simple!

As mentioned above, we kept Secondaire as simple as we could. However, in order to maintain the ability to detect twists in Secondaire with a quick glance, we added a marker line off-center. This is very helpful when taping your line, sewing the webbing on our end, and just general aesthtics of the webbing.

Blue color scheme

Tech Specs

Dimensions

Secondaire Dimensions

Width – 20.0 mm (0.79 inches)

Thickness – 2.50 mm (0.10 inches)

Weight – 44 g/m (2.96 lbs/100 feet)

Strength

MBS – 25.0 kN (5,620 lbf)

WLL – 8.3 kN (1,873 lbf)

Webbing Anchors

AWL4 Mean Strength – 25.6 kN (5,755 lbf)

AWL4 MBS – 24.0 kN (5,395 lbf)

AWL5 Mean Strength – 23.3 kN (5,238 lbf)

AWL5 MBS – 21.7 kN (4,878 lbf)

AWL6 Mean Strength – 25.7 kN (5,777 lbf)

AWL6 MBS – 24.2 kN (5,440 lbf)

MightyLock Mean Strength – 22.8 kN (5,125 lbf)

MightyLock MBS – 22.0 kN (4,945 lbf)

Webbing Grips

LineGrip Slippage – No slippage up to 150% of WLL (22 kN)

Wafer XL Slippage – No slippage up to 150% of WLL (15 kN)

Wafer Slippage – No slippage up to 150% of WLL (6 kN)

Sewn Loop

Mean Strength – 23.2 kN (5,215 lbf)

MBS – 22.0 kN (4,950 lbf)

Thread Type – 210-Tex Dyneema Thread

Material

Raw Materials – 100% Polyester

Weave Structure – Single zone weave with black marker yarns

Weave Zoning – Single Zone

Walkability

Style – Optimized for backups and longlines

Optimum Tensions – 1.0 - 5 kN (225 - 1,125 lbf)

Preferred Lengths – 50+ m (165+ feet)

Highline

Approved – Yes

Backup Length – How long should the backup be with a Secondaire mainline?

  • 50m main - 54m backup
  • 60m main - 64.8m backup
  • 100m main - 108m backup
  • Other lengths - Backup 8% longer than main

Stretch

1 kN – 1.69%

2 kN – 2.64%

3 kN – 3.5%

4 kN – 4.71%

5 kN – 6.88%

6 kN – 9.78%

7 kN – 11.96%

8 kN – 13.55%

9 kN – 14.96%

10 kN – 16.28%

11 kN – 17.52%

12 kN – 18.65%

Secondaire stretch
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page

#title#

#price#
×