You have no items in your shopping cart.
Spider HighWheel Pulley
Flat pulley with ball bearings
The HIGHWHEEL is an aluminum pulley with a 2.5 cm (1 inch) roller base that slides on two steel ball bearings to ensure smooth movement.
The special aluminum roller prevents jamming between the webbing and the bearings. The roller is completely smooth and leaves no marks on the webbing when sliding.
The side plates swivel open to accommodate all slackline webbing from 24 to 26 mm width.
The rounded shape of the HIGHWHEEL
The shape of the HIGHWHEEL is optimized to maximize strength and reduce weight to only 91 gr.
The plate holes are compatible with all types of carabiners, including those with ferrules.
Tensioning assistant
The HIGHWHEEL pulley is an excellent assistant when tensioning a slackline using the Primitive self-locking system. Friction is minimized by the bearings and the efficiency of the HIGHWHEEL is maximized when used as a multiplier.
The side surface of the plates is extremely smooth so as not to damage the edges of the slackline.
Is it better to use a CLASSIC carabiner or a SCREW NUT carabiner?
If you want to use the HIGHWHEEL as a transport/slider carabiner, we recommend the purchase of the screw nut carabiner.
However, if you are using the HIGHWHEEL primarily as a tensioning assistant, we recommend the classic carabiner, which speeds up frequent hooking/unhooking operations.
Accessory fall arrest lanyard
You can attach the HIGHWHEEL to the harness by passing a 3 mm fall arrest lanyard through the holes in the plates.
This way, you will never lose your HIGHWHEEL wherever you are.
Warnings
The HIGHWHEEL is a connector that is not certified as PPE for use at heights above 1 m. If you use HIGHWHEEL as a carrying device on webbing, always use in combination with a fall arrest safety rope for the person.
Read the instruction manual carefully and follow the instructions for use described.
Tech Specs
Dimensions
Length – 78.0 mm (3.07 inches)
Width – 42.0 mm (1.65 inches)
Depth – 40.0 mm (1.57 inches)
Roller Diameter – 25.0 mm (0.98 inches)
Roller Width – 28.5 mm (1.13 inches)
Weight – 91 g (3.21 oz)
Strength
MBS – 20.0 kN ()
WLL – 4.0 kN (900 lbf)
Material
Roller Material – Aluminum
Sideplate Material – Aluminum
User Manual
Related Products
BC Roller
Small, lightweight webbing carabiner
Say hello to the all new BC Roller, a webbing pulley carabiner designed for tensioning Slacklines and rolling across highlines. This carabiner is lightweight, durable, and fits well with most...
From $49.00
-25%
CAMP Dryad Double Pulley
The CAMP Dryad Double Pulley is a compact and efficient double pulley that is fantastic for longlines. It's small enough that it fits nicely in your pack and big enough...
$49.00
$36.75
-25%
Edelrid Eddy
The Edelrid Eddy is a fantastic brake for your pulley system. The low profile design works very well with the embedded brake technique using the SMC 3" Double PMP's. Even...
$149.00
$111.75
-25%
Sold Out
Edelrid Spoc
A compact and efficient progress capture device that is ideal for taglines. The innovative cam works fantastic with ropes as small as 5mm, making it the ideal tool for pulling...
$99.00
$74.25
-25%
Edelrid Wind Up
Lightweight, compact chest ascender that's great for a multiplier on a pulley system. Comes with two large eyes for clipping to, ideal for attaching a multiplier pulley. Works with 8...
$69.00
$51.75
-10%
Green 20
Shipping early May
If you like our Green slackline webbing, you are going to LOVE this new 20mm version! The same great feeling, strength, and stretch as our 1" version, but narrower and...
$2.35
$2.12
-25%
MadRock Lifeguard
The MadRock Lifeguard is auto-belay device that is fantastic for use as a brake in your pulley system. It's a very small device with excellent holding power. A sturdy release...
$99.00
$74.25
