Shackle Line-Locker Kit


Shackle Line-Locker Kit

The Shackle Line-Locker is an excellent alternative to adjustable webbing anchors such as the AWL. It works great as the tensioning side of your line as well as the static side as it attaches directly to any of the Pulleys that we offer in the shop. A bomb-proof method of attaching your line to your anchor, whether it be a highline, or just a line in the park.

Note: the 1/2" Line-Locker Kit is meant for the tensioning side and the 5/8" Line-Locker Kit is meant for the static side due to the sizes of the shackles and how they interact with the other components within the setup.

The Shackle Line-Locker Kit comes with the following components:

  • One Van Beest Anchor Shackle
  • Two 1-1/2" I.D. Steel Rings
  • 3.5 feet of 1-1/2" Tubular Webbing for sleeving
  • The 5/8" version comes with a replacement bolt to keep the rings centered on the bolt

The Shackle Line-Locker is characterized by the following features:

  • Moderate strength retention in most types of webbing (up to 85% retention in nylon webbings).
  • Attach webbing directly to the pulley system or your master-point.
  • Uses ready made components to achieve a high-strength anchor point.
  • Uses protective sleeve in order to protect your webbing from sharp points within the shackle

Tech Specs


Shackle Type – 1/2-inch Van Beest Anchor Shackle or 5/8-inch Van Beest Bolt-Type Shackle

Weight – 684 - 1,784 g (11.7 - 62.9 oz.)

Approved Webbing Widths – 17 - 32 mm (0.69 - 1.25 inches)


MBS – 60.0 kN (13,488 lbf)

WLL – 12.0 kN (2,698 lbf)

Strength Retention – 75 - 80%


Shackle Material – Forged High Strength Steel

Sleeve Material – Cordura Nylon

Ring Material – Forged High Strength Steel

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page