Welcome to Balance Community!

Search results for 'pack'

Items 1 to 15 of 17 total

Set Ascending Direction
per page

  1. 1
  2. 2
  • SMC 3" PMP - Double

    8 Review(s)
    The best pulleys on the planet for your tensioning system. With precision sealed ball bearings, pulling tension on even the longest of lines becomes much easier with these pulleys. Bomb-proof construction allows for big margins for highlines and longlines. A must for any dedicated slackliner. Learn More
    MBS 48.0 kN (10,790 lbf)
    WLL 9.6 kN (2,158 lbf)
    Weight 567 g (20.0 oz)
  • Van Beest 1/2" Screw-Pin Shackle

    5 Review(s)
    The Van Beest 1/2" Screw-Pin Anchor Shackle is a nice size shackle for all sorts of uses in your slackline set. With a jaw width of 13/16", this shackle will fit just about anywhere in your slackline rig. Made from high tensile, Grade 6 steel and batch tested for strength. Learn More
    MBS 106.8 kN (24,000 lbf)
    WLL 17.8 kN (4,000 lbf)
    Weight 330 g (11.6 oz)
  • Sterling 9mm SafetyPro Static Rope

    2 Review(s)
    • Great for Anchors - Lightweight and strong, great for highline anchors.
    • Supple and Packable - A great rope for packing in on those Alpine Projects
    • Great Knot-ability - A great diameter for tying all types of knots.
    • Sold by the meter
    The perfect rope for building your highline anchors! Learn More
    MBS 19.0 kN (4,271 lbf)
    WLL 1.9 kN (427 lbf)
    Material Nylon Sheath / Nylon Core
    Weight 51 g/m (3.43 lbs/100 ft.)
  • Van Beest 7/16" Screw-Pin Shackle

    1 Review(s)
    The Van Beest 7/16" Screw-Pin Anchor Shackle is a nice size shackle for all sorts of uses in your slackline set. With a jaw width of 3/4", this shackle will fit with most hardware used in your slackline kit. Learn More
    MBS 80.1 kN (18,000 lbf)
    WLL 13.3 kN (3,000 lbf)
    Weight 190 g (6.7 oz)
  • BC TreeLite

    5 Review(s)
    Introducing the all new BC TreeLite Tree Protectors. These awesome tree protectors are a shrunken down version of our BC TreePRO, built specifically for our Adjustable Anchor Webbing. The TreeLite offers the same wonderful tree protection that our TreePRO offers, but in a smaller package. Learn More
    Weight 162 g (5.71 oz.)
  • Petzl Ascension - Right Hand

    The Petzl Ascension Handled Ascender is a great tool for adding strength to your pulling power. Easily tighten longer lines by yourself by adding the Ascension to your gear bag. Grab on to ropes with more power and pull even hard on your tensioning system. Learn More
    MBS 4 - 6 kN (depending on rope size)
    Material Aluminum, Stainless steel, Plastic, Rubber, Nylon
    Weight 165 g (5.82 oz)
  • LineBag 2.0

    2 Review(s)
    The BC LineBag 2.0 is the perfect solution for your slackline webbing! Made from Tough 1000 Denier Cordura Nylon, there isn't a better way to store your line. Designed for the frequent slackliner who needs a great way to store their webbing. Learn More
    Material 1000 Denier Cordura Nylon
    Weight Depends on Size

    Starting at: $49.00

  • BC Freerider Slackline Pack

    4 Review(s)
    The Freerider Slackline Pack is the ultimate pack for your highline and slackline adventures. With room main pouch, external straps for ropes and webbing, and an easily accessible brain pouch, this is THEE pack for the dedicated slackliner! Color may vary from picture. Learn More
    Material Lightweight Durathane
    Weight 3.00 lbs (1.38 kg)
  • SMC 3" Pulley Pack

    2 Review(s)
    The SMC 3" Pulley Pack is a set of pulleys to get your started on your longline tensioning system. It includes 2x SMC 3" Double Pulleys and 1x SMC 3" Single Pulley. Free shipping in the US Learn More
    MBS 60.0 kN (13,488 lbf)
    WLL 12.0 kN (2,698 lbf)
    Weight 1,488 g (52.49 oz)
  • Feather - By the Meter

    • Very Lightweight - Perfect for the traveling slackliner
    • Low Friction - Great for soft releases and primitive systems
    • Packs Super Small - Great for a quick line in the park
    • Current Color - Black
    Learn More
    MBS 20.0 kN (4,500 lbf)
    WLL 4.0 kN (900 lbf)
    Material Polyester (PES)
    Weight 34 g/m (2.28 lbs/100 ft)
  • Pull Squared Multiplier Kit

    7 Review(s)
    A super lightweight multiplier kit built for primitive style slacklines. Easily extend your primitive setup to 150 feet or three times the tension. Perfect for slackliners looking to take the next step with their setup. Learn More
    MBS 8.9 kN (2,000 lbf)
    WLL 1.8 kN (400 lbf)
    Weight 502 g (17.7 oz)
  • 2 Review(s)
    The 6mm Stainless Oval Quicklink is an ultra light, ultra strong connector that is pefect for your highline anchors. Smooth construction out of high quality stainless steel. Learn More
    MBS 31.9 kN (7,165 lbf)
    WLL 6.4 kN (1,433 lbf)
    Material 316L Stainless Steel
    Weight 35 g (1.23 oz)

    Regular Price: $11.90

    Special Price $7.90

  • SMC CRx Pulley

    1 Review(s)
    The SMC CRX Pulley is a great pulley for multipliers. It's extreme lightweight design is perfect to carry with you as an extra pulley for added mechanical advantage. At just 63.8g, you would hardly feel the weight at all in your pack. Learn More
    MBS 27.0 kN (6,070 lbf)
    WLL 5.4 kN (1,214 lbf)
    Weight 63.8 g (2.25 oz)

    1 Review(s)
    The ultimate slackline brake. With built in 3" sheave that has virtually no friction. Easily reach the working load of your pulleys in any combination. Tension lines up to 700 feet by yourself with a 5:1 pulley system or up to 2,000 feet with a 9:1 pulley system. Free shipping in the US Learn More
    MBS 44.0 kN (9,891 lbf)
    WLL 8.8 kN (1,978 lbf)
    Material Alloy 7075 Aluminum
    Weight 1,100 g (38.80 oz.)
  • Elevated Abrasion Protection Sleeving

    1 Review(s)

    An elevated version of our old Sidewinder Velcro Line Sleeves with lightweight and higher abrasion resistance.

    • Easy to Install With Velcro - Sleeve edges are lined with velcro to make installation on your rig a breeze.
    • Low Friction - Urethane-coated on one face to help with snags and surface abrasions.
    • Lightweight - Made from exceptionally lightweight 1000-denier Cordura for easy carrying to your rig
    • Very Good Puncture Resistance - Strong material makes it very hard to puncture or tear
    • Available in two sizes.
    Learn More
    Material 1000 Denier Cordura (10.5 oz.), with 5 mil urethane coating.
    Weight 50 g/m (3.36 lbs/100 ft.)

    Starting at: $4.50

Items 1 to 15 of 17 total

Set Ascending Direction
per page

  1. 1
  2. 2
Post your comment

Balance Community: Slackline Outfitters