Welcome to Balance Community!

Search results for 'kit'

Items 1 to 15 of 27 total

Set Ascending Direction
per page

  1. 1
  2. 2
  • SMC 3" PMP - Double

    8 Review(s)
    The best pulleys on the planet for your tensioning system. With precision sealed ball bearings, pulling tension on even the longest of lines becomes much easier with these pulleys. Bomb-proof construction allows for big margins for highlines and longlines. A must for any dedicated slackliner. Learn More
    MBS 48.0 kN (10,790 lbf)
    WLL 9.6 kN (2,158 lbf)
    Weight 567 g (20.0 oz)
  • Wind Dampener Kit

    3 Review(s)
    The Wind Dampener Kit is the perfect way to stop the oscillations of your slackline or highline in windy conditions. The kit comes with 10 pre-cut wind dampeners, a roll of White Slackline Tape, and a set of instructions. Never let the wind stop you from slacklining again! Learn More
  • Rock Exotica 1.5" Omni-Block Pulley - Single

    A highly versatile pulley for multiplying your tensioning system.

    • Versatile Swivel - Makes rigging a breeze, often eliminating several connectors
    • Openable Side Plates - Install the rope without removing your pulleys from the anchor
    • Lightweight - A low weight for how efficient the pulley is
    • Extremely Efficient - Especially efficient bearings allow smooth tensioning
    Learn More
    MBS 36.0 kN (8,093 lbf)
    WLL 8.0 kN (1,798 lbf)
    Weight 256 g (9.20 oz)
  • SMC 3" Pulley Pack

    2 Review(s)
    The SMC 3" Pulley Pack is a set of pulleys to get your started on your longline tensioning system. It includes 2x SMC 3" Double Pulleys and 1x SMC 3" Single Pulley. Free shipping in the US Learn More
    MBS 60.0 kN (13,488 lbf)
    WLL 12.0 kN (2,698 lbf)
    Weight 1,488 g (52.49 oz)
  • Simple Primitive Multiplier Kit

    This primitive multiplier kit will help gain additional mechanical advantage when rigging your primitive style slackline kit. Easily add twice as much tension as you could before with this incredibly simple multiplier kit design. Learn More
    MBS 22.2 kN (5,000 lbf)
    WLL 4.0 kN (899 lbf)
    Weight 185 g (6.5 oz.)
  • BC Primitive Slackline Kit

    19 Review(s)
    • Includes equipment to setup lines up to 16m (55 feet) long
    • Great for first time slackliners that like a bit more play in the line
    • Uses a simple primitive system for tensioning
    • Bounce and play on this extremely dynamic primitive kit

    Free Shipping in the US

    Learn More
    MBS 15.0 kN (3,372 lbf)
    WLL 3.0 kN (674 lbf)
    Weight 2.06 kg (4.50 lbs)
  • Shackle Line-Locker

    4 Review(s)
    The Shackle Line-Locker is a inexpensive, strong and reliable way to anchor your slackline webbing. Compatible with webbings from 11/16" all the way up to 1-1/4" wide. This is one of the most versatile webbing anchors out there! Learn More
    MBS 89.0 kN (20,000 lbf)
    WLL 7 kN (1,573 lbf)
    Weight 684 - 1,784 g (11.7 - 62.9 oz)

    Starting at: $29.00

  • Versatile Slackline Kit

    2 Review(s)
    • Includes equipment to setup lines up to 150m (500 feet) long
    • The ultimate in longline kits. Never upgrade your system again with this setup
    • Uses a powerful pulley system for tensioning
    • Whether you're rigging long or high, this kit is built for the dedicated slackliner
    Free Shipping in the US Learn More
    MBS 60.0 kN (13,488 lbf)
    WLL 12.0 kN (2,698 lbf)
    Weight 13.50 kgs (29.70 lbs)

    As low as: $779.60

  • BC Primitive PRO Slackline Kit

    4 Review(s)
    • Includes equipment for lines up to 64m (205 feet) long
    • Optimized for the quick learner or aspiring longliner
    • Uses a primitive system to tension the line
    • A fantastic kit for someone looking for lots of room to grow or to take their setup to the next level
    Free shipping in the US Learn More
    MBS 20.0 kN (4,500 lbs)
    WLL 4.0 kN (900 lbs)
    Weight Depends on Webbing Selection
  • Primitive Tensioning Strap

    4 Review(s)
    The Primitive Tensioning Strap is a great way to tension your primitive slackline while keeping the line you walk on separate from the tensioning system. Never worry about damaging your slackline webbing or having to build a primitive system right in the middle of a long piece again! Learn More
    MBS 33.4 kN (7,500 lbf)
    WLL 6.0 kN (1,350 lbf)
    Weight 530 g (18.7 oz)
  • Van Beest 7/16" Screw-Pin Shackle

    1 Review(s)
    The Van Beest 7/16" Screw-Pin Anchor Shackle is a nice size shackle for all sorts of uses in your slackline set. With a jaw width of 3/4", this shackle will fit with most hardware used in your slackline kit. Learn More
    MBS 80.1 kN (18,000 lbf)
    WLL 13.3 kN (3,000 lbf)
    Weight 190 g (6.7 oz)
  • Titen Series Custom Slackline Kit Builder

    2 Review(s)
    The Titen Series Custom Slackline Kit Builder is the ultimate tool for building your slackline kit from scratch. Individually select each component needed for your kit. With an easy to use interface and helpful links to relevant Slack Science articles to help you along the way. Learn More
    MBS Depends on selection
    WLL Depends on selection
    Weight Depends on selection

    From: $2.80

    To: $3,401.55

  • BC Classic Longline Kit

    5 Review(s)
    • Includes equipment to setup lines up to 75m (250 feet) long
    • A wonderful first longline kit with a wide variety of webbing options to choose from
    • Uses pulley system for tensioning
    • Launch yourself into the world of longlining with the BC Classic Longline Kit
    Free Shipping in the US Learn More
    MBS 20 - 42 kN (4,500 - 9,450 lbf)
    WLL 4.0 - 8.4 kN (900 - 1,890 lbf)
    Weight 18 - 27 lbs (8.2 - 12.3 kg)
    Starting at $529.00

  • Lightweight Pulley System

    The Lightweight Pulley System is a high powered pulley system that focuses on low weight components. Don't let the weight of the system fool you though, you can easily rig lines up to 300 feet with this system! Learn More
    MBS 36.0 kN (8,093 lbf)
    WLL 8.0 kN (1,798 lbf)
    Weight 5.40 kg (11.90 lbs)

    As low as: $794.10

  • Van Beest 5/8" Bolt-Type Shackle

    5 Review(s)
    The ultimate shackle for your slackline rig. The smooth construction eliminates sharp burrs which can damage your line. These shackles are made from high tensile, Grade 6 steel and batch tested for strength. Learn More
    MBS 166.8 kN (37,500 lbf)
    WLL 27.8 kN (6,250 lbf)
    Weight 740 g (26.1 oz)

Items 1 to 15 of 27 total

Set Ascending Direction
per page

  1. 1
  2. 2
Post your comment

Balance Community: Slackline Outfitters