Slacklining is a great way to spend some time with your friends and family, why not bring some balance into your community with the Balance Community Primitive Slackline Kit?
This kit has been built from quality components that will last years to come. When you are ready to take the next step with your slacklining, the components from this kit will carry with you!
The kit includes the following items:
- 80 feet of 1" Slack-Spec Tubular Webbing
- 5 Oval Carabiners
- 2 Line-Locker Rings
- 1 Multiplier Ring
- Two 7 ft. Slings
- Instruction booklet - Downloadable above.
Assembled by hand in Davis, CA
|MBS||15.0 kN (3,372 lbf)|
|WLL||3.0 kN (674 lbf)|
|Weight||1.81 kg (4.00 lbs)|
BC Primitive Slackline Kit Specifications
|5 star|| |
|4 star|| |
Review by Joel (Posted on October 14, 2014)
When I'm done setting my line I like to only have about a foot of the line lost due to the tension system so that's why I usually have to reset the multiplier a few times.
Very quick and easy setup though. Highly recommend this!
PS: You can probably make this on your own for cheaper if you're a penny saver.
Review by Nick (Posted on July 11, 2014)
Review by Justin (Posted on July 4, 2014)
Review by patrickoneill21 (Posted on February 10, 2014)
Review by avroomer (Posted on December 28, 2013)
Review by Anderson (Posted on June 10, 2013)
Review by mike (Posted on May 6, 2013)
It's very informative and uses the same techniques that are used in our BC Primitive Slackline Kit.
6x Omega Pacific Aluminum Oval Carabiners (http://www.balancecommunity.com/Omega-Pacific-Aluminum-Oval-Carabiner)
2x Small Steel Rings (http://www.balancecommunity.com/small-steel-ring)
2x Simple Anchor Slings (http://www.balancecommunity.com/simple-anchor-sling)
80 feet 1" Slack Spec Tubular (http://www.balancecommunity.com/1-slack-spec-tubular)
Here is a nice guide for setting up a slackline without trees as well: http://slackline.hivefly.com/slackline-without-trees/