The Titen Series Custom Slackline Pulley System is a customizable pulley system for your slackline setup. With the base level products selected, you can rig lines up to 200 ft. long by yourself. The top notch options provide enough efficiency and strength to rig lines up to 400 feet long alone and 500 feet long with the help of a friend (with larger possibilities coming soon.
With different options and an array of different configurations to choose from, you can build your pulley system the way you want it to be! Save money by building your pulley system with the pulley system builder, which is cheaper than buying the products individually from the shop.
Choose the parts for your pulley system below according the diagram. When you click on an item on the left column, information about that specific product will pop-up in the right hand column. You can then click on the details button to view more information about that specific product. All included accessories will be mentioned in the short description of the product in the right hand column. If you have any questions, feel free to Contact Us.
These are the powerhouse for your pulley system. The job of the main pulleys is to hold the full force of the line. The efficiency is not as important as the brute strength of the pulleys. Choose pulleys that have a working load limit that is inline with how much tension you plan on putting on your line. For instance, if you plan on putting forces up to 2,500 lbf on your slackline, you should be using the stronger SMC 3" Double Pulleys. However, if weight is a big priority for you and you only need 1,800 lbs of tension on your line, the Rock Exotica Machined Doubles would be a better choice.
This is the piece of the tensioning system that is holding all the force. Choose a brake that holds the size rope you will be using and can hold the amount of force you will be putting on your line. Remember that with a 5:1 pulley system, the brake is holding 1/5 of the total force and with a 9:1 pulley system, t's holding 1/9 of the total tension.
The attachment point is an optional piece of the tensioning system. Having a rigging plate consolidates the gear on the tensioning end as well as spaces everything out for easier rigging. However, you can get by without one if you use the embedded brake technique, which is described in the Slack Science Articles below.
The part of your multiplier that grabs onto the static rope. This point in the system will be holding three times the force that you are pulling on the rope. That means that if you are pulling 100 pounds of force on the pulley rope, there will be 300 lbs of force applied to the Multiplier Rope-Grab. For this reason, you should use the strongest option possible as to not damage your rope.
The source of all your power! The multiplier pulley is responsible for 2/3 of your efficiency in the pulley system, so having the most efficient pulley possible for this point in the system is best!